Specifications

Water Pump W.P.B 6500
Type: centrifuge single stage
Capacity:6500 lit/min
Max.Pressure:20 bar 
Max. Suction lift :8m 
Material: aluminum alloy or bronze anticorrosion, salt petre, water sea and Acid AISI 431 
Pump shaft: stainless steel BS 970431 S29 
Primer : Double piston suction pump   

Foam Pump F.P.B 600

Type : gear

Capacity : 600lit/min

Operating Pressure : 16bar

Material : Non-corrosive cast iron or bronze alloy

Monitor M.O.N 4500 

Water and foam monitor : out put 4500-6500 lit/min@10bar 

Movement : rotation 360 & swivel range -15 up to +75  

Head of 80 meters and ability to throw in jet and fog. 

Operation: manually from top of the vehicle and Automatically by control panel from inside the cabin or by a control panel at the end of the vehicle or portable control panel

Hosereel H.O.B 1"x30m

Hose specification: One inches high pressure equipped by consecutive type nozzle.

Foam and water operation : in fog and jet

Winder : Manual and Electrical

Electricity and Lighting

Operating panel is equipped with indicators, operating switches inside the cabin and pump compartment, all projectors and lighting are installed in proper positions.

Piping

All relating piping and inputs and out puts in according by standards

And our customer request.

All water and foam piping and connections will be made of stainless steel

Compartments

Main body structure will be made of 40 x20 or 40 x 40 profile.

Body coverage sheet: 1.25 mm. oil sheet steel or 1.5 mm. aluminum.

Roof of the vehicle: 3 mm. jagged aluminum.

Compartment floor : 2 mm. common aluminum

Tanks

Up to 10 tons water tank is made of 4 mm stainless steel. Equipped with noise-reducing blades (baffle or partition), mud collector, over fellow, man hole, noise –reducing blades, and out put valve.

Up to 2000 lit. foam tank is made of 4 mm stainless steel

Up to 500 Kg. powder tank is made of 8 mm. carbon steel St 37