Specifications

Water Pump W.P.B 1500

Type: centrifuge single stage
Max . out put 1500 lit/min

 Max.normal pressure:20 bar 

Max high pressure :16 bar

Max. Suction lift :8m 
Material: aluminum alloy or bronze anticorrosion, salt petre, water sea and Acid AISI 431 
Pump shaft: stainless steel BS 970431 S29 
Primer : Double piston suction pump   
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

Monitor M.O.N 1500

Water and foam monitor : out put 1500 lit/min

Movement : rotation 360 & swivel range -15 up to +75  

Head of 40 meters and ability to throw in jet and fog. 

Operation: manually from top of the

Hosereel H.O.B 1"x25m

Hose specification: One inches high pressure equipped by consecutive type nozzle.

Foam and water operation : in fog and jet

Winder : Manual

Electricity and Lighting

Operating panel is equipped with indicators, operating switches inside the cabin and pump compartment, all projectors and lighting are installed in proper positions.

Projector can be adjusted up to 150cm in height

Piping

All relating piping and inputs and out puts in according by standards

And our customer request.

All water and foam piping and connections will be made of stainless steel

Compartments

Main body structure will be made of 40 x20 or 40 x 40 profile.

Body coverage sheet: 1.25 mm. oil sheet steel or 1.5 mm. aluminum.

Roof of the vehicle: 3 mm. jagged aluminum.

Compartment floor : 2 mm. common aluminum

2cabins ,the front cabin for equipments ,the rear cabin for water pump,piping sys. ,hosereel and operational board.
 

Tanks

Up to 900 water tank is made of 3 mm stainless steel. Equipped with noise-reducing blades (baffle or partition), mud collector, over fellow, man hole, noise –reducing blades, and out put valve.

Up to 100 lit. foam tank is made of 3 mm stainless steel 
 

Any other equipments as cumstomer's request