Specifications

Water Pump W.P.B 2700
Type: centrifuge double stage
Capacity:2700 lit/min
Max.Pressure 1st stage:20 bar

Max.Pressure 2nd stage:40bar

Max. Suction lift :8m 
Material: aluminum alloy or bronze anticorrosion, salt petre, water sea and Acid AISI 431 
Pump shaft: stainless steel BS 970431 S29 
Primer : Double piston suction pump   
 

Monitor M.O.N 2700  

Water and foam monitor : out put 2700 lit/min@10bar 

Movement : rotation 360 & swivel range -15 up to +75  

Head of 50 meters and ability to throw in jet and fog. 

Operation: manually from top of the vehicle 
 

Hosereel H.O.B 1"x25m

Hose specification: One inches high pressure equipped by consecutive type nozzle.

Foam and water operation : in fog and jet

Winder : Manual

Electricity and Lighting

Operating panel is equipped with indicators, operating switches inside the cabin and pump compartment, all projectors and lighting are installed in proper positions.

telescopic projectors can be adjusted up to 150cm in height.
 

Piping

All relating piping and inputs and out puts in according by standards

And our customer request.

All water and foam piping and connections will be made of stainless steel

Compartments

Main body structure will be made of 40 x20 or 40 x 40 profile.

Body coverage sheet: 1.25 mm. oil sheet steel or 1.5 mm. aluminum.

Roof of the vehicle: 3 mm. jagged aluminum.

Compartment floor : 2 mm. common aluminum

Tanks

Up to 2500lit water tank is made of 3 mm stainless steel. Equipped with noise-reducing blades (baffle or partition), mud collector, over fellow, man hole, noise –reducing blades, and out put valve.

Up to 250 lit. foam tank is made of 3 mm stainless steel