Specifications

Water Pump W.P.B 6500

Type: centrifuge single stage
Max . out put 6500 lit/min

 Max. pressure:20 bar 

 Max. Suction lift :8m 
Material: aluminum alloy or bronze anticorrosion, salt petre, water sea and Acid AISI 431 
Pump shaft: stainless steel BS 970431 S29 
Primer : Double piston suction pump   
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

Monitor M.O.N 4500

Water and foam monitor : out put 4500-6500 lit/min

Movement : rotation 360 & swivel range -15 up to +75  

Head of 80 meters and ability to throw in jet and fog. 

Operation: manually from top of the

Hosereel H.O.B 1"x30m

Hose specification: One inches high pressure equipped by consecutive type nozzle.

Foam and water operation : in fog and jet

Winder : Manual

Electricity and Lighting

Operating panel is equipped with indicators, operating switches inside the cabin and pump compartment, all projectors and lighting are installed in proper positions.

Piping

All relating piping and inputs and out puts in according by standards

And our customer request.

All water and foam piping and connections will be made of stainless steel

Compartments

Main body structure will be made of 40 x20 or 40 x 40 profile.

Body coverage sheet: 1.25 mm. oil sheet steel or 1.5 mm. aluminum.

Roof of the vehicle: 3 mm. jagged aluminum.

Compartment floor : 2 mm. common aluminum

Tanks

Up to 6500 water tank is made of 4 mm stainless steel. Equipped with noise-reducing blades (baffle or partition), mud collector, over fellow, man hole, noise –reducing blades, and out put valve.

Up to 650 lit. foam tank is made of 4 mm stainless steel